/
Configure Vision DB

Configure Vision DB

Owned by Ben Silva
Last updated: Dec 02, 2015
1 min read

Problem

This article documents where to set the Vision database Vision will use when it loads.

Solution

When vision loads it needs to know what Vision database to use. This is configured in the ERP ImportExportConnections table.

  1. Refer to Configure ERP DB for Vision to determine which ERP database to access.

  2. In ERP database refer to the ImportExportConnectionsString column of the ImportExportConnections table. Set the SERVER and DATABASE values to match the desired Vision database.

Related articles

Configure ERP DB for Vision

Related content

Migrating from Vision v2.16.6.0 to v2.16.7.0+
Migrating from Vision v2.16.6.0 to v2.16.7.0+
Aeros VISION
More like this
Installing Aeros Vision
Installing Aeros Vision
Aeros ERP
More like this
VisionSetting Table
VisionSetting Table
Aeros VISION
More like this
Published Vision Reports
Published Vision Reports
Aeros VISION
More like this
Data Model Editor
Data Model Editor
Aeros VISION
More like this
Connections
Connections
Aeros VISION
More like this