Required Fields
Certificate No: The certificate number you wish to utilize.
Inspection Date: The date of Inspection
Processing Plant Code: The processing plant Code set up on the processing plants form. See: Plants and Mills#Details
Inventory Class Code: The Inventory class code set up under System Types. See System Types Tab
Number Head: Enter the Gross Head.
Optional Fields
Lot Number: Enter a lot number
Plant Official: Enter the Plant Officials Name
Inspector: Enter the Inspectors Name
Ante DOA: Enter the Number of Head that was Dead on Arrival prior to inspection
Ante Head Cond: Enter the number of Head Condemned Prior to Inspection
Ante Total Weight: Enter the weight of Head Condemned Prior to Inspection
Post Head Cond: Enter the number of Head Condemned post Inspection
Post Carcasses: Enter the weight of carcasses post Inspection
Post Parts: Enter the weight of parts post Inspection
Each Line might have duplicate header (info Above) information entered but below is where it will differ for each.
C, G, or L: C= Cause, G = Grade or L = Live Haul
Code: If you used L, must enter flock number. If you used G, must enter the grade code. If used C, enter one of the condemn codes below
Number: If you entered G, enter Grade Count. If you entered C enter the number Condemned for that Condemn type.
Cause Comment: Enter any Comment
Grade UOM: Use one of the below G for Grade was entered.
Ticket: Associated Live Haul Ticket if used L for Live Haul
