Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

Problem

This article documents where to set the Vision database Vision will use when it loads.

Solution

When vision loads it needs to know what Vision database to use. This is configured in the ERP ImportExportConnections table.

  1. Refer to Configure ERP DB for Vision to determine which ERP database to access.
  2. In ERP database refer to the ImportExportConnectionsString column of the ImportExportConnections table. Set the SERVER and DATABASE values to match the desired Vision database.

  • No labels