House (Barn)

1 Details
2 Feed Lines
3 Feed Bins
4 Equipment
5 Down Time
6 House Capacity
7 Address and Phone
8 Feed Supplement
9 House Comments
10 Controls

You can manage houses on a farm in the AeLive application through the House screen. To do so, navigate to the house screen by clicking Facility Management. From there, select a farm the house belongs to.After selecting the farm, either add a new house by clicking the Add House button on the top ribbon bar menu or right clicking the Farm and selecting Add a New House, from the context menu. The house screen will be displayed as shown below. Then enter or edit the following fields:

Details

House Code. The code of the house. The House Code must be unique within the same Farm. User should check the system settings for house codes because they determine how code validation should work.

House Description. The description of the house.
Status. The current status of the house. The current selections are Active or Inactive. This field will default to the system default of Active.
Contract. Sets the contract defaults. (see screen shot below for the contract defaults for house.) The house contract defaults to the selected farm contract. Changes can be made after selecting a contract. House contracts can be set by navigating to System, selecting contract from the Systems menu and selecting the Houses tab.

Industry Type. The appropriate Industry Type for the House. For more information on Industries, please see Industries and Industry types.
Delivery Zone: You can add delivery zones for scheduling feed to the Farm or the House. Delivery Zones can be set up by navigating to System, selecting System Settings and the System Types tab.
House Type. The type of the house. House Types can be set up by navigating to System, selecting System Settings and the System Types tab.
Feed Schedule Configuration. Select a feed schedule configuration from the drop down list. Feed Schedule configurations can be set up by navigating to Feed Management, selecting Feed Scheduling and Feed Schedule Configurations. Feed Plan and Feed Scheduling can be disabled in System Settings.
Feed Plan Configuration. Select a feed plan configuration from the drop down list. Feed Plan configurations can be set up by navigating to Feed Management, and selecting Feed Plan Configuration. Feed Plan and Feed Scheduling can be disabled in System Settings.
House Type.
Year Built. The year the house was built.
Units. Set the unit of measure for setting House Area and Dimensions.
Width. Set the width of the House.
Depth. Set the Depth of the House.
Sq. Area. Set the Square Area of the house based on the unit of measure set.
Tiers. The amount of tiers or levels for the house.
Down Time. The amount of down time between animal groups in house. This is the number of days needed to service the house between animal groups.
Down Time UOM. In this field, select the unit of measure used to set the amount of down time between animal groups in house.
Grouping Code. This is a drop down field used to group houses ultimately for reporting purposes.
Feed Delivered by Bin? Select Yes, if you would like Feed delivered by Bin for this house.
Ending Inventory by Bin? Select Yes, if you would like the ending feed inventory to be by bin for this house

To save your changes click the Save button.

Feed Lines

You can add feed lines to the houses and bins to account for feed inventory in the line.

Line Name: A unique name for the line within the House.
Line Capacity: The capacity of the Line
Line Capacity Unit of Measure: The Capacity unit of measure used.

Feed Bins

You can add feed bins to the house. Click on the Feed Bins tab as shown below. To add a new feed bin the user will click on a new empty row on the bottom of the grid and fill in the appropriate data:

Bin Code. The code of the bin.
Bin Type. The type of bin. This list is provided by what the user has entered in the Bin Type management screen under the System navigation button on the left menu pane.
Override Capacity. Enables the user to override the selected bin type’s total capacity value for this bin.
Total Capacity. The total capacity of the bin based on the bin type. This is a read only field.
Unit of Measure. The unit of measure for the capacity. This is a read only field.
Sex. Select a sex if the bin will be used to feed a certain sex of the group.
Status. If a bin is inactive it will not be utilized in scheduling feed to that bin.

If there are invalid data or the required fields aren’t entered, the grid will display validations on each field that need to be addressed.

To view the validation message, hover over the X on the field. If the field is not validated the user will not be able to save the data not only on the grid, but any data on the management screen. The user will also not be able to do anything else such as close the screen or open a new screen until the issue is resolved.

To cancel a new record, the user will hit the Esc key. To delete a record, the user will select the whole row and hit the Deletebutton on the keyboard. This will bring up a confirmation prompt before deleting.

To save your changes click the Save button.

Equipment

You can add Equipment to the house. Click on the Equipment tab as shown below. To add a new Equipment Type the user will click on a new empty row on the bottom of the grid and fill in the appropriate data:

Allocation Code. This can be any code you wish the record to be.
Type. The Equipment Type. Equipment Types can be set up by navigating to systems and selecting Equipment from the Systems Menu.
Code. The Equipment Code. Equipment Code can be set up by navigating to systems and selecting Equipment from the Systems Menu.
Quantity. The quantity of the Equipment Type in the house.
Start Date. The date the equipment was placed in house.
End Date. The date the equipment was discontinued in use
Comment. Allows you to include notes for each equipment type.

If there are invalid data or the required fields aren’t entered, the grid will display validations on each field that need to be addressed.

To view the validation message, hover over the X on the field. If the field is not validated the user will not be able to save the data not only on the grid, but any data on the management screen. The user will also not be able to do anything else such as close the screen or open a new screen until the issue is resolved.

To cancel a new record, the user will hit the Esc key. To delete a record, the user will select the whole row and hit the Delete button on the keyboard. This will bring up a confirmation prompt before deleting.

To save your changes click the Save button.

Down Time

The Down Time tab allows you to track your down time when a house is made unavailable for a particular date range. Click on the Down Time tab as shown below.

Start Date. The start date for the down times for this house.
End Date. The end date for the down times for this house.
Comment. Allows you to include notes for each down time.

To save your changes click the Save button.

House Capacity

Configure House Capacities by sex. Unspecified capacities will be used if one does not exist. You can record capacities by Number of Birds, Square Feet per Bird, Square Inches per Bird and Square Meters per Bird.

Address and Phone

You can also assign addresses and Phone Numbers to the farm. To do so, click on the Address and Phone tab as shown below. To add a new address, click on a new empty row on the bottom and fill in the appropriate data:

Address type. This is the type of address that is being entered in. The current selections are Street, Mailing, Billing andShipping. The physical address is the Street address. The field allows the user to either click the drop down field to make their selection or use the type-ahead feature for faster input. This is a required field and a selection must be made.
Address. The actual street address of the farm. This is a required field.
Address (misc). Any miscellaneous address information for the farm. This field is optional.
City. The city of the farm. This is a required field.
Country. The country of the farm. This is a required field.
State/Province. The state or province of the farm. This is a required field.
Postal Code. The postal code of the farm. This field is optional.
Number Type. The type of number that is being entered in. The current selections are Phone and Fax. The field allows the user to either click the drop down field to make their selection or use the type ahead feature for faster input. This is a required field and a selection must be made
Number. The phone/fax number of the farm. This is a required field.
Notes. Any notes the user wishes to make about the phone/fax number.

To save the record, the user will tab all the way till the next line. If there is invalid data or the required fields aren’t entered the grid will display validations on each field that need to be addressed.

To view the validation message hover over the X on the field. If the field is not validated the user will not be able to save the data not only on the grid but any data on the screen. The user will also not be able to do anything else such as close the screen or open a new screen until the issue is resolved.

To cancel a new record the user will hit the Esc key. To delete a record, the user will select the whole row and hit the Delete button on the keyboard. This will bring up a confirmation prompt before deleting.

To save your changes click the Save button.

Feed Supplement

You can apply wheat supplements to a house to adjust Feed Plan's. See additional information of Feed Supplements.

House Comments

On House form there is a tab for House Comments, You can add any comments about the specific house. These house notes will also show up on any flocks feed plan assigned/placed to that house. See: Feed Plan Process -Comments

Controls

To Edit or delete a house, right click on a house in the Facility Management Tree and select “Edit This House”. (You can also select the house and then click the “Edit Selected” button.)

The house can then be edited and changes saved. If the House needs to be deleted, do so by clicking the Delete button on the form. Password verification is needed as to not accidentally delete a facility. Deleting a facility may cause related records to be deleted.

Warning: If you accidentally delete a House, contact your system administrator