Feed Management --> Feed Plan Configuration
Each group may use a different feed Plan configuration. This configuration will give the rules for how to schedule feed. Feed buffers are set so that animals can be protected from running out of feed. Each configuration can be assigned to houses.
Configuration
Code: Enter a code to be used that is unique to that Feed Plan configuration
Description: Enter a description to describe this plan.
Status: Select a status of Active or Inactive. Inactive plans will no longer be able to be applied.
Feed Buffer: The house must always have this amount in hours/days/weight worth of feed at all times
Delivery Time Prior to 1st Placement: The amount of time that feed should be delivered to the house prior to the first flock placement.
Relations: Sets the Company/Divisions and the Industry Types the Expense Codes are associated with.
Additional Options Tab
Overrides
Ignore Feed Profile Maximum: Specifies whether to ignore the maximum delivery size configured in the feed profile. With this setting checked, maximum delivery size goal is no longer triggered.
Ignore Feed Profile Minimum: Specifies whether to ignore the minimum delivery size configured in the feed profile. A feed delivery therefore can be any size (rounding can still occur).
Allow Mixed Feed Types in Feed Bin: Specifies whether the next feed profile can be mix with the current feed profile.
Auto Consumption Adjustments
% Maximum Positive Adjustment: Specifies the maximum percent that Adjustments for Consumption can reach.
% Maximum Negative Adjustment: Specifies the Minimum percent that Adjustments for Consumption can reach.
Delivery Rounding
Round Rule: When we have a value that needs to be rounded, this will determine what the software does to get the rounded result:
Round: When we have a delivery amount that is not evenly divisible, the remainder will be rounded up or down, depending on whether it is greater or less than half the divisible amount.
Round Down: When we have an amount that is not evenly divisible, we will always round the value down to the next amount.
Round Up: When we have an amount that is not evenly divisible, we will always round the value up o the next amount.
Round UOM: The unit of measure for the "Round to Nearest" setting. If this is set to "KG", and Round to Nearest is set to "3", then all deliveries must be evenly divisible by three kilograms.
Round to Nearest: This is the value that determines how much a planned delivery is evenly divisible by. along with the unit of measure, this will determine what increments we will deliver in. If we want our deliveries calculated in 3MT increments, we set this to "3" and the units to "MT". If all we are concerned with is evenly rounded amounts, we'll set this value to "1".
Final Round to Nearest: The final feed delivery has exceptional logic that reconciles consumption, feed types and withdrawal at the end of the life of a flock, and rounding is no option. If you desire to rounding increment to differ, or not apply, to feed orders, you can set that here.
Round Feed Type: When we opt to round deliveries up to the next whole amount, we run the risk of delivering more feed than is specified in our feed profile goals. When a round up configuration does this, this informs the software what to do:
Round: Add the feed to the existing feed type, for the current delivery (delivering more than the goal).
Last: Add the feed to the existing feed type, for the current delivery (delivering more than the goal). <- This isn't a typo, at some point the logic for "round" was removed and the configuration garners the same results as choosing "Last".
Next: Create a new delivery for the next feed type and formula (delivering the goal and moving to the next ration).
Assign Houses Tab
The Assign Houses tab allows the user to assign the configuration to multiple houses.
Note, it's also possible to assign the feed plan configuration to a house by opening the House form (navigation Facility Management --> House --> Details tab --> Details group --> Feed Plan Configuration)