There will be times when events occur that require a group, or series of groups or farms to make adjustments to any of the system tables. For example, the weather may get very cold in the middle of winter, and Feed Consumption tables will need to be adjusted accordingly.
To make these temporary adjustments, animal managers can utilize the Table Adjustment form and globally make a change for the time period required. Several table adjustments can be applied to a house or a group, so if there is one sick flock who is also facing unexpected weather, both conditions can be accounted for.
| Table of Contents |
|---|
Adjustment Configuration
System → System Tables → Select a table → Adjustments
Details
- Code. Create a code that corresponds to the Table Adjustment. This code must be unique.
- Description. A description of the Table Adjustment the user wishes to imput.
- Status. Whether the Table Adjustment is currently Active or Inactive. This field will default to the system default of Active.
- Relations. Sets the Company/Divisions and the Industry Types the Table Adjustment is associated with.
Table
- Description: You can have multiple rows for a year so you can distinguish why the adjustment during that time period.
- Starting Date: The starting date of the adjustment. Note, the system will not utilize a year.
- Ending Date: The Ending date of the adjustment. Note, the system will not utilize a year.
- Value: The percent value you want to adjust the table up or down.
Applying to House
If you have a house that always under or over performs you can assign the adjustment to the house itself.
Facility Management → Open the house form → Table Adjustments Tab
- Select the appropriate table to adjust (Case Weight, Percent HD Production etc.)
- Right click in the form or select the green plus button on the right hand side.
- Select your adjustment from the drop down
Applying to a Flock
If you have a flock that is under or over performing you can assign the adjustment to the flock itself.
Select the flock → Open the flock form → Standards Tab
- Select the appropriate table to adjust (Case Weight, Percent HD Production etc.)
- Right click in the form under the adjustments section or select the green plus button on the right hand side.
- Select your adjustment from the drop down
Report Parameter
You can choose to show adjustments or dismiss the adjustments when running reports by selecting the following checkbox in report parameters.
